Cam Die Short Taper Rolling Machine
Product ID:CEG-TRM2000C(T)-W
Order Information
Name:Cam Die Short Taper Rolling Machine
Product ID:CEG-TRM2000C(T)-W
Selectable Parts :
C:For long heavy spring plate: Feeding with feeding car and track. Positioning on front and back.
T:For short light spring plate: Feeding with slide base. Positioning on back.
Optional Parts:
W:Width Control Facility
Design
Cam Die Short Taper Rolling Machine
-
Cam Die Short Taper Rolling Machine Used to processing the ends of automotive leaf spring.
-
Manual Feeding
-
Feeding Mode
-
For long heavy spring plate: Feeding with feeding car and track. Positioning on front and back.
-
For short light spring plate: Feeding with slide base. Positioning on back.
-
Integrated pedestal
-
Roll gap adjust by electric and manual
-
The material of main frame is 35 cast steel
Specifications
Cam Die Short Taper Rolling Machine
|
Rolling force |
||
|
Horizontal |
2000 |
kN |
|
Spring plate before rolling |
||
|
Length, Max. |
2200 |
mm |
|
Length, Min. |
300 |
mm |
|
Width, Max. |
120 |
mm |
|
Width, Min. |
40 |
mm |
|
Thickness, Max. |
30 |
mm |
|
Thickness, Min. |
5 |
mm |
|
Temperature |
950~1000 |
℃ |
|
Spring plate after rolling |
||
|
Length of rolled face[1] |
50-300 |
mm |
|
Tolerance |
||
|
±0.25 |
mm |
|
|
Rolling start position |
±1.5 |
mm |
|
Forming |
||
|
Slope, Max. |
0~25 |
% |
|
Rotate speed of roll |
22 |
rpm |
|
Diameter of roll |
380 |
mm |
|
Taper Rolling Machine |
||
|
Power |
37 |
kW |
|
Width Control Facility（Optional） |
||
|
Shaping force |
600 |
kN |
|
Width of spring plate before shaping |
50-120 |
mm |
|
Length of spring plate before shaping, Max. |
200 |
mm |
|
Angle of shaping |
0~10 |
degree |
[1]Perimeter of cam die is 380mm
